Loose cement plaster is a fact that is observed very often. Although this has remarkable long-term consequences, it is not always easy to avoid this problem, which is becoming more and more widespread over the years. We often ask ourselves questions about the cause of this phenomenon in order to avoid it. The following explanations may shed light on this phenomenon.
The permeability of the plaster used
Cement parging is mainly used for residential siding when it comes to new construction. Facade plaster is normally used to protect the masonry of the walls of your home, but it can also be used for decorative purposes. It is therefore important to keep it in good condition in order to avoid cracks. The plaster can also end up peeling off just like façade paints. This often occurs as a result of a widely distributed cracking on the façade. The deterioration of the plaster is sometimes due to the poor arrangement of the bricks that form the foundation wall, in other words: the foundation.
Exposed to the weather, the cement plaster ends up pale, dirty and develops cracks, which leads to its destruction. Poor erecting of the foundation wall is very often the cause of the degradation of cement plaster. The use of acrylic-based polymer cement is a way to repair failing plaster. This product offers good durability and provides protection of your plaster from ultraviolet light.
Deep cracks
Cracks in the exterior plaster tend to evoke a very serious problem, especially if they are large and deep. When they get worse over time, it should make you understand that these are active cracks. The continuous cracking of the plaster causes it to peel off by plate or to detach from the support without showing visible marks. The detachment area can be small or in large slabs. You should know that the quality of preparation of the substrate (which must be clean, hard, stable, sufficiently porous and grippy) directly determines the resistance of the plaster.
One way to remedy this problem is to fill in the cracks on the wall while they are still minimal. Avoiding cracks requires a huge amount of work to maintain the plaster, but also a good arrangement of all the elements of your construction. We are thinking of all the incoming tools in direct contact with the wall plaster, such as the fixing of water pipes for example.
Poor maintenance
You should also know that it is important to inspect the cement plaster from time to time in order to identify any problems in order to provide quick and effective solutions as soon as possible.
In reality, as it is not eternal, this coating can end up at one time or another presenting defects that may worsen over time. The annual maintenance of the plaster is therefore an obligation.
When the damage observed on the wall is too extensive, replacing the coating is the best option to consider. You will then have to remove the old one to make a new one. In order to better avoid the problems associated with the destruction of cement plaster, you must also know how to choose the products used when plastering your walls.
To do this, we will have to make sure that we obtain products with the characteristics that meet our needs. These are mainly protection against UV rays as well as long service life. It should be noted that the use of different products during our work can lead to problems related to the degradation of the cement plaster. They can also be the reason for the change in its texture or even its color.

Therefore, if you happen to run out of product in the middle of a job, always get the same one. In order to avoid such an inconvenience, trust us by contacting Ideal Cement. Our expertise in the installation of cement plaster is irrefutable. As far as washing your stucco is concerned, we recommend the user of a gentle cleaning method as well as a suitable supply .
In conclusion, cement plaster very often peels off and the reasons that lead to this phenomenon are many and varied. The wrong choice of products used during the work and poor maintenance are among the errors that cause this phenomenon of cement plaster taking off. Even the lack of maintenance on the walls can cause such a problem.